Terracotta Army Facts

How the Terracotta Warriors were Made

7 steps to make a terracotta warrior:

1. make the figure’s torso from the pedestal to the collar;
2. make the head, arms, and hands;
3. dry in the shade and assemble the arms and hands;
4. carve the body parts in detail; 
5. install the head to complete a terracotta warrior;
6. fire the warrior in the kiln;
7. paint it with colored pigments.

7 Steps to Make a Terracotta Warrior
Steps to Make a Terracotta WarriorSteps to Make a Terracotta Warrior

What Are the Terracotta Warriors Made of? – Yellow Earth

Experts have confirmed that the material used to mold the terracotta warriors and horses is a "yellow earth" sourced from around the burial sites. Yellow earth is easy to obtain, and was an appropriate material due to its adhesive quality and plasticity. The earth was screened and ground to remove impurities and to ensure it was fine and pure. A certain amount of white grit containing quartz sand, mica and feldspar was added. Adding grit to the earth strengthened its mechanical properties, which allowed the large figures to be easily shaped.

Read More: Were the Terracotta Warriors Made of Real Human Beings?
 

How the Terracotta Warriors Were Made?  

Make the Terracotta Warrior’s Torso from Pedestal to Collar

Artisans used mud to make a rough cast which was molded from bottom to top in sections. First they made the foot plate which was molded in a square pattern; the feet were the next, followed by the two legs and short pants. In order to represent muscle and bone to make the legs more lifelike, artisans would do some detailed sculpting. Short pants were made by carving a circle with a cord pattern above which were pasted prefabricated pieces of mud molded as pants. Next, the upper body was made by winding strips of clay upwards. In order to make the clay strips tight and strong, artisans would put sackcloth inside as underlay. This was pounded from the outside until they got a satisfactory shape and size. 
 

Make the Arms and Hands and Attach to Torso

Straight arms were molded in corresponding molds. Bent arms were made in separate pieces, divided at the elbow, and then glued together. Hands were molded in the same way as straight arms. After being dried in the shade, artisans attached the hollow arms to the torso and then the warrior's hands were inserted and pasted onto the arms.

Foot of Clay Figure
Feet of A Clay Figure
A Statue of a General
 Head of a Terracotta Warrior

Make the Terracotta Warrior’s Head 

The shaping of the head is generally acknowledged to be the most difficult, and the procedure was very complicated. First, artisans molded the front and back sides of the head roughly, glued them together, and then applied several layers of mud to get different facial shapes. By kneading, carving, scraping and pasting, artisans successively constructed eyebrows, eyes, noses, mouths, ears, hair buns and hat decorations for the heads of terracotta warriors. They drew each figure with a distinctive face, and experts have confirmed that these facial features were reproductions of individual Qin warriors.

Different Expressions on Soldiers'''' Faces
Different Expressions on Soldiers' Faces
Belly of Clay Figure
Belly Details of A Clay Figure

Carve the Details & Attach the Head

It is clear that the terracotta warriors are lifelike and vivid, and the reason is that the technical artisans did careful carving work to the molded body parts. They carved the legs, the arms, the feet in detail. Even the warriors’ armor were carved to exactly replicate the shape of the real ones. Attaching the head to the warrior’s body was the last step to integrate a complete terracotta warrior. 
 

Firing in Kilns

The figures of the terracotta warriors were fired in kilns. For even heating, the Qin artisans left small holes in appropriate places on the figure. For example, in the terracotta figure's neck, there were holes through which flames could evenly enter the figure's body cavity. During the firing, artisans paid special attention to the degree of heating which was maintained at around 1,000 C (1,830 F). Moreover, experts did many experiments and found that the figures were placed in the kiln upside down during firing. This was because the upper part of the figure was heavier than the lower part. It was more stable to put the figures in this way, which shows that Chinese workers had mastered the concept of center-of-gravity as early as two thousand years ago.
 

Glazing and Coloring

The Qin terracotta warriors we see today are steel gray without fresh colors. But archaeological investigations have found that this was not the original color of that mighty force. In April of 1999, excavators astonishingly unearthed six kneeling armored warriors whose bodies retained large sections of colorful painting, which demonstrated that the Qin artisans had elaborately painted the terracotta warriors after firing, to make this majestic army more lifelike. 

 

How the Terracotta Horses Were Made?

Fabricating terracotta horses is generally the same as making terracotta warriors. The heads, necks, bodies, legs, and tails of the terracotta horses were made separately, and then glued together for the second coating with mud. After detailed carving and decorating, they were put into kilns for firing. Colorful painting was the last step to manufacture the terracotta horses
 

Recommended Tour Itinerary:

Terracotta Warriors Tour: One-day to visit Terracotta Army and more
More Xi'an Tours


Further Reading:
 How to Repair the Damaged Terracotta Army Statues
How to Protect the Terracotta Warriors
 Secret Revealed from the Ears of Terracotta Warriors
 How did the Terracotta Army get burnt and destroyed?
Let's Smash the 5 Rumors of the Terracotta Army
 How tall are the Terracotta Warriors? Were ancient people taller than us?

Next: Discovery of Terracotta Army

- Last updated on Jan. 20, 2023 by Brenda Lian -
Questions & Answers on How the Terracotta Warriors were Made
Asked by Amila from AUSTRALIA | Aug. 20, 2023 01:29Reply
Why was terracotta used in making the Terracotta Army?
Answers (1)
Answered by Bella | Aug. 21, 2023 01:36
00Reply


It's not terracotta used, but local yellow clay, which was fired into terracotta. The yellow clay was used mainly because it is easy to get.
Asked by mae from AUSTRALIA | Jun. 09, 2023 00:19Reply
What does the level of detail and organization of the warriors tell us about ancient Chinese society
Answers (1)
Answered by Emily | Jun. 11, 2023 18:16
00Reply


First of all, the discovery of terracotta warriors is of great significance to the study of the burial system in ancient China.

Secondly, the discovery of Terra-cotta warriors is also of great significance for the study of ancient Chinese military system and military thought.

Last, the production technique and style of the terracotta warriors reflect the cultural level and artistic characteristics of the Qin Dynasty.
Ask a Question
Question Summary (100 characters)
Details (optional) (2,000 characters)
NameCountryEmail